Yikuai Yk330 Plasma Cutter Torch with High Qualit | RFQ Sourcing Details

Over View .New dual water cooling channel design (for both electrode and nozzle), highly increase the consumables working life;.Unique air channel design, gets more reliable cutting performance, more vertical cutting surface and more smoothly cut;.This torch with wide application to work with different plasma power source, especially suitable for finish machining cut.

Detail Matters needing attention Please don't push too hard, it will damage the thread.Use for a period of time, please check whether there is slag in the ventilation filter element inside the cutting gun head.If there is any loosening, clean it up in time.

Use a small wrench to align the air filter element with the wire mouth so as to avoid deviation and easy burning of the electrode nozzle.

Cutter gun cutting data reference table Cutting thickness (mm) Cutting current (A) Nozzle diameter Air pressure (Mpa) Punch time (min) cutting height (mm) Refer to the arc voltage Cutting speed (mm/min) note This parameter table is the cutting parameters of carbon steel plate, such as cutting stainless steel, copper, aluminum and other non-ferrous metal cutting speed should be relatively reduced;If it is a straight cutting workpiece, the current increases, the speed can be accelerated (Type YK0211 electrode is required for thick plate) The following is the cutting reference data for 400A Edge perforation arc cutting 45 ≥ ≥ Yk330 Shield Yk330 Electrode Yk330 Nozzle Yk330 Nozzle retaining cap Yk330 Small retaining cap Yk330 Big retaining cap Yk330 Vortex ring Yk330 Water tube Application Field ---TONYWELD BORN FOR HIGHER WEL DING EFFICIENCY