Large Capacity Sand Making Machine (VSI Crusher) | RFQ Sourcing Details

Sand Making Machine Introduction: The sand making machine, also called vertical shaft impact crusher and rubble shaping machine, is a kind of crusher impacted by the materials themselves.

Sand Making Machine is of high energy but low consumption and of international advanced level developed by introducing foreign outstanding technology of the same type of products. At present, Sand Making Machine is the most advanced and practical equipment for medium-sized and fine crushing and shaping.

Sand Making Machine Features: 1. It features of simple structure, high crushing efficiency and low production cost. 2. It can fine crush and crude grind materials, and the crushed products are of cubic shape. 3. The influence from the water in materials to the machine is little. 4.

It is suitable for crushing materials of medium, high and super hardness. 5. It works by stones hitting stones, so there is little wear for the machine and it can save energy and is of low consumption. 6.

The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as "sand for construction" and "cobble and broken stones for construction". 7. It features of fine stabilization, low noise. And because it crushes materials in the cavity, the dust pollution is little.

8. When used along with the rod mill and ball one, it can simplify the flowing process, lessen the energy consumption, improve the production efficiency and cut down the cost to a large degree.

Sand Making Machine Application: Sand Making Machine is widely used for medium-sized and fine crushing and shaping in the following industries: Minerals, quarry, abrasive, cement, refractory materials, alumina, quartz sand, emery, glass and so on.

Sand Making Machine Operating Principle: The materials fall into the impeller from the head of the machine and with the function of high-speed centrifugal force, they strongly hit against and highly grind the other parts of the materials bypass flowing around the impeller in an umbrella form.

After mutual impaction and between the impeller and the machine shell, the materials will move like a vortex and will be impacted, rubbed and pulverized many times. Then Sand Making Machine will come to the required fineness controlled by screening equipment, and discharge from the bottom of the machine.

Sand Making Machine technical data: Model B-7611 B-8518 B