Lathe Type Giant Automatic CNC Arc Welding Machin | RFQ Sourcing Details

. . Model NO.

NZC-R3000 Control Automatic Frequency Range Based on Custmers Requirement Electric Current AC/DC/Pluse/Inverter Customized/OEM Ok Protection Shield Add or Not as Required Welding Method TIG MIG Saw Paw Body Color Blue or as Required Core Components PLC, CNC, Gearbox, Motor Welding Current 40~600A Welding Seam Type Spiral Circular Longitudinal Stright Inner Hole Welding Torch One or Two or More as Required Welding Material Stainless Steel Aluminum Cast Iron Steel Cooper Transport Package Fumigation Woodern Box Specification 3000*1500*1800mm or as design Trademark Haoyu Origin China HS Code Production Capacity 500set/Year Lathe type giant automatic CNC arc welding machine gas air compressor tank welding machine I.Design Task Perform the automatic welding for the circular seams on the cylinder/ tank.

Ensure the location dimensions of the workpiece uniform, positioning automatically, convenient and reliable to use, welding quality meets the requirements, clamping fast and convenient. II.Basic Design 1.Welding torch is fixed while workpiece rotating. Welding position is horizontal.

The workpiece is clamped tightly by jig at two ends and rotates. 2.Two welding torches and two power sources work simultaneously to improve work efficiency. 3.Torch, rotary axis box and tailstock can be adjusted longitudinally to fit various kinds of welding.

4.Japan Omron PLC is adopted to control the machine to run and speed is adjusted by AC servo, which can improve the reliability of the equipment. 5.Adopts end face positioning and pneumatically clamping mode. 6.Adopts human-machine interface to alter the parameters.

The welding time and weld length can be set via this interface. The alteration of the parameters can be input through the touch button conveniently and timely. Parameters can be stored and called.

III.Parameters: 1 Applicable diameter max2000mm 2 Applicable length max 3000mm 3 Thickness >0.8mm 4 Rotation speed 0.2-2rpm 5 Motor power 0.55KW 6 Welding torch moving range in left-right direction 100mm 7 Welding torch lifting range 100mm 8 welding torch moving range in front-rear direction 50mm 9 Diameter of solid wire 1.0mm & 1.2mm 10 Welding power source Miller or lincoln or fronius or Japan OTC or panasonic or Aotai 11 Machine working voltage 380v 3phase 50hz 12 cooling method air or water cooling as requried 13 welding method TIG MIG SAW PAW as requried IV.

Main struction 1.This machine is made up of mainframe, spindle box and its pneumatic feeding mechanism, tailstock and its pneumatic feeding mechanism, workpiece supporting mechanism, welding torch feeding and adjusting mechanism, electrical control system, pneumatic system and welding power source.

2.The mainframe consists base, column and etc. The base is assembled and welded from the square tubes and plates with the upper surface machined, on which fixed the linear guide rails.

The right side of the guide rails installed the spindle box and its pneumatic feeding mechanism and its left side equipped with tailstock and its pneumatic device. The tailstock can be adjusted along the guide rails and the spacing can be adjusted to meet the requirements of various kinds of welding.

The tailstock is micro adjusted by hand-operated screw rod and the adjustment is marked by scaleplate. The tailstock is guided by the guide rails to ensure the concentricity to the spindle box. Beside the spindle box and the tailstock installed the welding torch clamping, adjusting and pneumatic lifting mechanism.

The mechanism can be adjusted and the spacing can vary. It also can be fastened after being adjusted. On the right outside of the machine fixed the electrical system control box and the front right side equipped with the control button panel, which is convenient to use and maintain. 3.

The Rotary Axis Box The rotating machine head is made up of AC motor, speed reducer, pneumatic chuck and conductive device. The adjusting of the rotating speed is achieved by using AC frequency converter to adjust the AC motor rotating speed. The speed reducer adopts two-stage worm gear to reduce the speed.

The material of the reducer case is aluminum alloy with large output torque, which is convenient to install and maintain. The conductive sleeve is made of copper. With filling conductive lubricant between the copper sleeve and the spindle it can gain a good wear resistance and electric conduction.

The pneumatic fixture automatically goes back to the start point at the end of every welding. The fixture clamps two ends of the workpiece tightly to ensure the uniformity of every clamping.

4 Tailstock C lamping Mechanism The pneumatic tailstock can be adjusted along the guide rails to meet the requirements of various kinds of welding. It adopts hand-operating screw rod to adjust. The workpiece is clamped pneumatically and rotates. The extension of the tailstock equipped with pneumatic fixture.

The fixture clamps two ends of the workpiece tightly to ensure the uniformity of every clamping. Machine base is made of cast iron and thick steel tube.Guide rails are installed on the base 5.Workpiece Supporting Mechanism The left and right sides of the machine installed V-shaped brackets to support the workpiece.

The V-shaped brackets move up and down pneumatically, move up when clamping and move down when welding.

V.Sales Term Payment term: 30% T/T advance along with the purchase order, balance should be cleared before delivery Delivery time: 45 days on receipt of payment in advance Guarantee: 12 months for the whole machine VI.

Company introduction : Jinan Haoyu Automation system Co., Ltd (another name is Jinan Haoyu CNC Machinery Co., Ltd) is a high-tech private company located in Jinan City ,Shandong province. We have been a professional manufacturer in the field of welding automation over 17 years.

Our products mainly include automatic welding machine, robot welding station, automatic pipe cutting machine, automatic material handling equipment, automatic assembling machine,these machines are widely used in the areas of auto ces and military industry, etc.

We established a long-term cooperative relationship with more than 60 countries and regions, such as Canada,Italy,Australia,United States,India,south America.Our welding machines are recognized by customers with quality and excellent service.the company have obtained CE and ISO certification .

With strong R&D staffs and Strict QC&QA team,so can design and produce as customers' requirements.Our sales team provide perfect support from Pre-sale and after-sale, in-sale.Technology Improvement and perfect products are the eternal pursuit of the company. Welcome t